Single chamber industrial cleaning machine for hydraulic cylinders

CLEANING MACHINE FOR LARGE HYDRAULIC CYLINDERS

Cleaning technology with water and water-based detergents. Cleaning chamber with usable volume of 5000 litres and a 5800 kg payload

The machine is made of AISI 304 stainless steel (EN 1.4301) throughout. The single chamber machine features very compact dimensions. TermoVide® V1700/2 heralds a new generation of industrial cleaning machines. The machine works with water-based detergents. The cleaning process takes place in a single hermetically sealed tank: the single chamber. The TermoVide® V1700-2 single chamber machine is designed to clean large size hydraulic cylinders. The cleaning process uses a single water-based detergent but the machine is configured for the use of two detergents in order to deal with different types of contaminants. The single chamber has useful dimensions of 800W x 6900D x 900H mm, a working volume of 5000 litres, and a 5800 kg payload. Phases available in the cleaning process:
  • VCA Vacuum and controlled atmosphere
  • insR-uDi/T initial spray rinse, non-recirculated recycled demineralized water or mains water
  • insR-r-uDi/T initial spray rinse, recirculated recycled demineralized water or mains water
  • sW-De1 Spray cleaning, detergent 1
  • sR-uDi/T spray rinse, non-recirculated recycled demineralized water
  • sR-r-uDi/T spray rinse, recirculated recycled demineralized water
  • sW-De2 Spray cleaning, detergent 2
  • sR-uDi/T spray rinse, non-recirculated recycled demineralized water
  • sR-r-uDi/T spray rinse, recirculated recycled demineralized water
  • sR-fDi Spray rinse, non-recirculated fresh demineralized water
  • sR-r-fDi Spray rinse, recirculated fresh demineralized water
  • sR-fDi-P Spray rinse, non-recirculated fresh demineralized water and passivating agent
  • D drying
The process temperature can be set between 35°C and 80°C The various hydraulic cylinder cleaning phases are performed in sequence in the single chamber. Each process phase on the TermoVide® V1700/2 industrial cleaning machine can be added, eliminated, or repeated, and all the parameters used in each phase can be customized, meaning cycle time, temperature, vacuum, and so forth. The ease with which customized processes can be set up and reused makes this machine extremely flexible. A cleaning process can be set up for each type of hydraulic cylinder on the TermoVide® V1700-2 industrial cleaning plant, without reducing throughput, and the process can be saved and retrieved when needed. The TermoVide® process developed for cleaning hydraulic cylinders can deep clean the cylinders internally and externally to remove machining residues, chemical process residues, cutting oils, dust, etc. Main features of the machine:
  • the hydraulic cylinders are loaded horizontally with a forklift truck
  • designed to function with two detergents
  • equipped with an oil skimmer to extend the working life of detergents
  • is a compact machine in two sections installable in 4-5 days
  • smaller footprint than a traditional ultrasonic cleaning machine
  • is a customized solution
  • environment-friendly machine
  • SW designed to meet Industry 4.0 requirements
  • is equipped with an intuitive and user-friendly HMI interface
  • prevents the evaporation of cleaning and rinsing liquids, reducing direct and indirect electric energy consumption
  • extends the duration of detergents by reducing their consumption
  • uses controlled atmospheres when necessary, to increase effectiveness of the cleaning phases and avoid materials oxidation without using passivating agents
  • compatible also with passivating agents
  • uses steam in the rinse phase for enhanced efficiency
  • uses vacuum to boost drying performance.
  • cleans and dries difficult materials such as those with high specific heat
  • cleans and dries complex features such as holes, cavities and undercuts, also at low temperature, speeding up subsequent surface treatment processes
The TermoVide® V1700/2 management software features several access levels: the software logs all operator-entered process types, saves any technical problems affecting the machine, highlights periodic maintenance intervals, etc. The system features a “help” button to send a service request email to Eurocold technical service. This function is particularly useful when the machine is operating 24/7 or in a time zone that is significantly different from that of Italy. Technical service accesses the machine remotely, retrieves and analyses the machine data and, in the vast majority of cases, solves the problem without an on-site visit.

Contact us
For
more info